Ricoh SH-P1 M020 Field Service Manual page 217

7941 009 Log3: Serial No.
7941 010 Log3: Refill Flag
7941 011 Log3: Install Date
7941 012 Log3: R: TCounter
7941 013 Log4: Serial No.
7941 014 Log4: Refill Flag
Displays an ASCII string in the Log3, that identifies the
manufacturer.
Default: 16
• This data is originally entered as BCD and
changes into a 16-character string in order to
convert it to ASCII.
• However, only 10 bytes can be used to
communicate with the controller, so the 16 bytes
are truncated to 10 bytes.
Displays "RF" when the cartridge requires refilling
Cartridge version number in the Log3
Default: 2
Displays Year-Month-Date of installation for the AIO
unit in the Log3, this setting updates automatically
through a serial interface with the machine when the
new unit is installed
Default: 8
Displays a logged number in the range "0" to
"99999999" in the Log3, this is the total count at time
of installation
[0 to 99999999 / 0 / 1]
Displays an ASCII string in the Log4, that identifies the
manufacturer
Default: 16
• This data is originally entered as BCD and
changes into a 16-character string in order to
convert it to ASCII.
• However, only 10 bytes can be used to
communicate with the controller, so the 16 bytes
are truncated to 10 bytes.
Displays "RF" when the cartridge requires refilling
Cartridge version number in the Log4
Default: 2
Engine Service Mode
5
215