Ricoh SH-P1 M020 Field Service Manual page 145

1003 017 Tray3: Thick1
1003 018 Tray3: Thick2
1003 019 Tray3: Thick3
1003 020 Tray3: Thin
1003 021 Tray4: Plain
1003 022 Tray4: Thick1
1003 023 Tray4: Thick2
1003 024 Tray4: Thick3
1003 025 Tray4: Thin
1003 026 Duplex: Plain
1003 027 Duplex: Thick1
1003 028 Duplex: Thick2
1003 029 Tray5: Plain
1003 030 Tray5: Thick1
1003 031 Tray5: Thick2
1003 032 Tray5: Thick3
1003 033 Tray5: Thin
1103 PreRotate Temp
1103 001 PreRotate Temp
Fusing Temp DFU
1105
Adjusts the fusing temperatures for printing and standby mode.
1105 001 Reload Temp
[–7.0 to +7.0 / 0.0 / 0.1 mm]
PreRotate Temperature Adjustment
Adjusts the prerotate temperature at the Fusing roller.
Push [ ] or [ ] to select the settings (plus or minus).
[0 to 180 / 135 / 1 deg.]
Adjusts the fusing temperature for reloading.
[100 to 180 / 135 / 1 deg.]
Engine Service Mode
5
143