Ricoh SH-P1 M020 Field Service Manual page 135

004 Bit Switch 4
bit 0 DFU
bit 1 DFU
bit 2 DFU
IPDS print-side reversal
If this bit switch is enabled, the simplex pages of IPDS jobs will be printed on the front
bit 3
side because of printing on the back side of the page. This might reduce printing
speed.
bit 4 DFU
bit 5 DFU
bit 6 DFU
bit 7 DFU
1001 Bit Switch
005 Bit Switch 5
bit 0 DFU
bit 1 Multiple copies if a paper size or type mismatch
occurs
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to
print all copies even if a paper mismatch occurs.
bit 2 Prevent SDK applications from altering the
contents of a job.
If this BitSw is enabled, SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called the "GPS
Filter".
• The main purpose of this BitSw is for troubleshooting the effects of SDK
applications on data.
Printer Service Mode
0 1
- -
- -
- -
Disabled Enabled
- -
- -
- -
- -
0 1
- -
0: Disable
1: Enable
(Single
(Multiple copy)
copy)
Disabled Enabled
5
133