Ricoh SH-P1 M020 Field Service Manual page 197

5860 007 POP before SMTP
5860 008 POPtoSMTP Waiting
5860 009 Mail Receive Protocol
5860 013 POP3/IMAP4 Auth.
5860 014 POP3 Srvr Port No
5860 015 IMAP4 Srvr Port...
5860 016 SMTP Rx Port No
5860 017 Mail Rx Interval
Enable/disable POP before SMTP. If the SMTP server
does not have authentication, you can enable POP
before SMTP, them POP authentication is available
(SP 5860 013)
[0 to 1 / 0 / 1]
0: Disable
1: Enable
When using POP before SMTP, this SP mode
determines the maximum wait time between POP
authentication and connection with SMTP.
Communication stops if this time is exceeded.
[0 to 10000 / 300 / -]
Selects the protocol for the mail reception.
[1 to 3 / 1 / 1]
1: POP3
2: IMAP4
3: SMTP
If POP before SMTP is enabled, then you can use this
SP to enable or disable encryption mode for POP
authentication
[0 to 2 / 0 / 1]
0: Auto
1: Off
2: On
Input the POP server port number.
Input the IMAP4 server port number.
[1 to 65535 / 143 / 1]
Input the SMTP port for the mail reception.
[1 to 65535 / 25 / 1]
Specifies the interval for the mail reception.
Engine Service Mode
5
195