Ricoh SH-P1 M020 Field Service Manual page 153

Summer Time
Lets you set the machine to adjust its date and time automatically with the change to
Daylight Savings time in the spring and back to normal time in the fall. This SP lets you
set these items:
• Day and time to go forward automatically in April.
• Day and time to go back automatically in October.
• Set the length of time to go forward and back automatically.
The settings for 002 and 003 are done with 8-digit numbers:
Digits
1st, 2nd
5307
3rd
4th
5th, 6th
7th
8th
5307 001 ON/OFF
5307 003 Start
5307 004 End
Summer time start/end Setting
Meaning
Month. 4: April, 10: October (for months 1 to 9, the
first digit of 0 cannot be input, so the eight-digit setting
for 002 or 003 becomes a seven-digit setting)
Day of the week. 0: Sunday, 1: Monday
The number of the week for the day selected at the 3rd
digit. If "0" is selected for "Sunday", for example, and
the selected Sunday is the start of the 2nd week, then
input a "2" for this digit.
The time when the change occurs (24-hour as hex
code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) =
01, and so on.
The number of hours to change the time. 1 hour: 1
If the time change is not a whole number (1.5 hours
for example), digit 8 should be 3 (30 minutes).
Enables/disables the settings for 002 and 003.
[0 or 1 / 1 (NA/EU), 0 (AA/CHN) / -]
0: OFF
1: ON
The start of summer time.
The end of summer time.
Engine Service Mode
5
151