Ricoh SH-P1 M020 Field Service Manual page 175

Cer Abnml Cause
0 Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification has
1
expired.
An SSL error notification has been issued. Issued after the certification has
5816 068
2
expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
5816 069 Cer Updt ReqID
5816 083 Firm Updating
5816 085 Firm UpUsr Conf
5816 086 Firmware Size
5816 087 CERT: MacroVsn
5816 088 CERT: PAC Vsn
5816 089 CERT: ID2 Code
5816 090 CERT: Subject
Displays a number code that describes the reason for
the request for update of the certification.
The ID of the request for certification.
Displays the status of the firmware update.
This SP setting determines if the operator can confirm
the previous version of the firmware before the
firmware update execution. If the option to confirm the
previous version is selected, a notification is sent to the
system manager and the firmware update is done with
the firmware files from the URL.
Allows the service technician to confirm the size of the
firmware data files during the firmware update
execution.
Displays the macro version of the @Remote
certification.
Displays the PAC version of the @Remote certification.
Displays ID2 for the @Remote certification. Spaces are
displayed as underscores (_). Asteriskes (***)
indicate that no @Remote certification exists.
Displays the common name of the @Remote
certification subject. CN = the following 17 bytes.
Spaces are displayed as underscores (_). Asterisks
(***) indicate that no DESS exists.
Engine Service Mode
5
173