Ricoh SH-P1 M020 Field Service Manual page 219

7993 001 Total counter
SP8XXX: Data Log 2
The SPs in this group are prefixed with a letter that indicates the mode of operation. The mode of
operation is referred to as an 'application'. Before reading the Group 8 Service Tables, make sure that
you understand what these prefixes mean.
Prefix Application
T: Total
P: Print
O: Other
Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them on the small
LCDs of printers and faxes that also use these SPs.
• All of the Group 8 SPs are reset with SP5801-001 Memory All Clear.
8381 T:Total PrtPGS
8381 001 Field Number
8384 P:Total PrtPGS
8384 001 Field Number
8387 O:Total PrtPGS
8387 001 Field Number
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted
as 2.
• When several documents are merged for a print job, the number of pages stored are counted for
the application that stored them.
Displays the engine total counter. It counts up for all
prints, including service reports.
[0 to 99999999 / 0 / 1]
What It Means
Grand total of the items counted for all applications (C, F, P, etc.).
Totals (pages, jobs, etc.) executed for each application when the
job was not stored on the document server.
Other applications (external network applications, etc.). Refers to
network applications such as Web Image Monitor. Utilities
developed with the SDK (Software Development Kit) are also
counted.
These SPs count the number of pages printed by the customer.
The counter for the application used for storing the pages
increments.
[0 to 99999999/0/1]
Engine Service Mode
5
217