Ricoh SH-P1 M020 Field Service Manual page 212

5. System Maintenance Reference
7807 001 Reset-SC/Jam
7832 Display-Self-Diag
7832 001 Display-Self-Diag
7836 Resident Memory
5
7836 001 Resident Memory
7901 Assert Info.
7901 001 File Name
7901 002 Number of Lines
7901 003 Location
7904 Near End Timing
7904-001 Maintenance Kit
AIO Information
Displays information about the AIO.
7931
7931 001 Machine ID
210
• Returns a value of "0" if the number stored in the cartridge is not recognized.
• This is information on the AIO ID Chip so if the AIO is not installed, if the AIO is
not set properly, or if the front door is open, no value will be displayed because
the machine cannot communicate with the AIO.
Resets the SC and jam counters. To reset, press
[#Enter].
• This SP does not reset the jam history counter:
SP7-507
Press [OK] to display a list of error codes. Nothing is
displayed if no errors have occurred.
Displays the memory capacity of the controller system.
Records the location where a problem is detected in
the program. The data stored in this SP is used for
problem analysis.
Sets the Near End Timing of the Maintenance Kit.
[0 to 2 / 1 / 1]
Identification number of the machine (Model Name)
[0x00 to 0xFF / 0x00 / 0x01]