Ricoh SH-P1 M020 Field Service Manual page 150

5. System Maintenance Reference
3926 001 Filming Prevent
5
SP5-xxx: Mode
5001 All Indicators On
5001 001 All Indicators On
5024 mm/inch Selection
5024 001 0:mm 1:inch
5051 Refill Toner Disp
5051 001 Refill Toner Disp
148
[0 to 1 / 0 / 1]
0: No
1: Yes
If set to "Yes": This is done every 50 prints, for 0.2 s, to
lubricate the cleaning blade. The charge roller voltage
is cut, and toner is transferred to the cleaning blade. If
the 50-print interval is reached during a job, printing
stops and this process is done.
Set this to yes to prevent the following:
• Grey banding parallel to the paper feed
direction
• Cleaning blade flipping due to friction between
blade and drum
Noise due to friction between blade and drum
Turns on or off the all indicators on the operation
panel.
Measuring Unit Selection mm/inch
Selects the unit of measurement.
After selection, turn the main power switch off and on.
0: mm(Europe/Asia)
1: inch(North America)
Toner Refill Detect Display
This SP switches on/off the message that prompts the
operator when it is necessary to replenish toner in the
machine.
0: ON (Message displayed)
1: OFF (Message not displayed)