Ricoh SH-P1 M020 Field Service Manual page 220

5. System Maintenance Reference
• These counters are used primarily to calculate charges on use of the machine, so the following
pages are not counted as printed pages:
• Blank pages in a duplex printing job.
• Reports printed to confirm counts.
• All reports done in the service mode (service summaries, engine maintenance reports, etc.)
• Test prints for machine image adjustment.
• Error notification reports.
• Partially printed pages as the result of a jam.
8391 LSize PrtPGS
8391 001 A3/DLT, Larger
5
8411 Prints/Duplex
8411 001 Prints/Duplex
T:PrtPGS/Dup Comb
These SPs count by binding and combine, and n-Up settings the number of pages
8421
processed for printing. This is the total for all applications.
[0 to 99999999/0/1]
P:PrtPGS/Dup Comb
These SPs count by binding and combine, and n-Up settings the number of pages
8424
processed for printing by the printer application.
[0 to 99999999/0/1]
O:PrtPGS/Dup Comb
These SPs count by binding and combine, and n-Up settings the number of pages
8427
processed for printing by Other applications
[0 to 99999999/0/1]
842x 001 Simplex> Duplex
218
These SPs count pages printed on paper sizes A3/DLT and
larger.
[0 to 99999999/0/1]
This SP counts the amount of paper (front/back counted as 1
page) used for duplex printing. Last pages printed only on one
side are not counted.
[0 to 99999999/0/1]