Ricoh SH-P1 M020 Field Service Manual page 264

6. Troubleshooting
SD card error 1: Confirmation
The machine detects an electronic
license error in the application on the
SD card in the controller slot
immediately after the machine is
turned on. The program on the SD
card contains electronic confirmation
866 D
license data. If the program does not
contain this license data, or if the
result of the check shows that the
license data in the program on the SD
card is incorrect, then the checked
program cannot execute and this SC
code is displayed.
SD card error 2: SD card removed
6
The SD card in the boot slot when the
867 D
machine was turned on was removed
while the machine was on.
SD card error 3: SD card access
868 D
An error occurred while an SD card
was used.
262
• Program missing from the SD card
1. Download the correct program for the
machine to the SD card.
• SD card is removed
1. Insert the SD card, then turn the machine
off and on.
• SD card not inserted correctly
• SD card defective
• Controller board defective
1. Insert SD card correctly.
2. Reformat the SD card.
• If you want to try to reformat the SD
card, use SD Formatter Ver. 1.1.
1. Replace the SD card.
2. Replace the controller board.