Ricoh SH-P1 M020 Field Service Manual page 170

5. System Maintenance Reference
5810 001 Fusing SC Clear
5811 Machine Serial
5811 002 Display
5811 004 Set: BICU DFU
5
Service TEL
Use these SP modes to input service and support telephone numbers. Enter the number
5812
and press [OK].
Press the [Clear] key to delete the telephone number.
5812 001 Telephone
5812 002 Facsimile
5816 NRS Function
5816 001 I/F Setting
168
Resets an SC code for a fusing unit error.
After using this SP mode, turn the main switch off and
on.
[0 to 1 / 0 / 1]
Displays a machine serial.
[0 to 255 / 11 / 1]
Used to input the machine serial number. This is
normally done at the factory.
[0 to 255 / 11 / 1]
Support telephone number
Use this to input the telephone number of the CE
printed on the SP print mode printout.
Use this to input the fax number of the CE printed on
the SP print mode printout.
Selects the remote service setting.
[0 or 2 / 2 / 1]
0: OFF (Remote service off)
2: Network (@Remote remote service on)