Ricoh SH-P1 M020 Field Service Manual page 151

5055 DisplayIPaddress
5055 001 DisplayIPaddress
5056 Coverage Counter
5056 001 Coverage Counter
5169 CE Login
5169 001 CE Login
5195 Limitless SW
5195 001 Limitless SW
5302 Set Time
Display IP Address
Switches the banner display of the IP address off and
on.
[0 to 1 / 0 / 1]
0: No
1: Yes
For example, if this SP is switched on, the IP address
will be displayed below "Ready" while the printer is in
standby mode:
Ready
169.254.187.055
Display or does not display the coverage counter on
the LCD.
[0 to 1 / 0 / 1]
0: Not displayed
1: Displayed
Login as a CE
If you will change the printer bit switches, you must
'log in' to service mode with this SP before you go
into the printer SP mode.
[0 to 1 / 0 / 1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
[0 to 1 / 0 / 1]
Local time setting
Engine Service Mode
5
149