Configuring a VPRN Service with CLI
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure a VPRN
service and provides the CLI commands.
1. Associate a VPRN service with a customer ID.
2. Define an autonomous system (optional).
3. Define a route distinguisher (mandatory).
4. Define VRF route-target associations or VRF import/export policies.
5. Define PIM parameters (optional).
6. Create a subscriber interface (optional).
7. Create an interface.
8. Define SAP parameters on the interface.
9. Define BGP parameters (optional).
10. Define RIP parameters (optional).
11. Define spoke SDP parameters.
12. Enable the service.
Page 1102
→ Select node(s) and port(s).
→ Optional - select QoS policies other than the default (configured in
context).
→ Optional - select filter policies (configured in
→ Optional - select accounting policy (configured in
→ Optional - configure DHCP features.
→ BGP must be enabled in the
→ RIP must be enabled in the config>router>rip context.
config>filter
config>log
config>router>bgp
7750 SR OS Services Guide
config>qos
context).
context).
context.