Alcatel-Lucent 7750 SR Manual page 1253

proxy-arp-policy
Syntax [no] proxy-arp policy-name [policy-name...(up to 5 max)]
Context config>service>vprn>interface
config>service>vprn>sub-if>grp-if
Description This command enables a proxy ARP policy for the interface.
The no form of this command disables the proxy ARP capability.
Default
no proxy-arp
Parameters
policy-name — The export route policy name. Allowed values are any string up to 32 characters long
redundant-interface
Syntax redundant-interface red-ip-int-name
no redundant-interface
Context config>service>vprn
config>service>vprn>sub-if>grp-if
Description
This command configures a redundant interface used for dual homing.
Parameters red-ip-int-name — Specifies the redundant IP interface name.
remote-proxy-arp
Syntax [no] remote-proxy-arp
Context config>service>vprn>interface
config>service>vprn>sub-if>grp-if
Description
This command enables remote proxy ARP on the interface.
Remote proxy ARP is similar to proxy ARP. It allows the router to answer an ARP request on an
interface for a subnet that is not provisioned on that interface. This allows the router to forward to the
other subnet on behalf of the requester. To distinguish remote proxy ARP from local proxy ARP, local
proxy ARP performs a similar function but only when the requested IP is on the receiving interface.
Default
no remote-proxy-arp
7750 SR OS Services Guide
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
The specified name(s) must already be defined.
Virtual Private Routed Network Services
Page 1253