Alcatel-Lucent 7750 SR Manual page 1489

sap
Syntax IES SAP sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id [create]
no sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id
Context config>service>ies>interface
Description
This command creates a cross connect SAP on the ccag-id referenced in the IES service. A CCAG
SAP is identified by four items; the ccag-id, the CCAG path, the pairing type and the cc-id. A CCAG
SAP on an IES IP interface supports all the available QoS, filtering and accounting features as an IES
IP interface Dot1Q SAP.
The no form of the command removes a SAP from the IES service IP interface context. Once
removed, all information and resources concerning the SAP is deleted from the system including the
CCAG cc-id in use on the CCA path.
Parameters ccag — The ccag portion of the SAP identifier is required and specifies that the ies SAP is of the
ccag-id — The ccag-id portion of the SAP identifier is required and specifies which ccag-id on which
.a | .b — The .a and .b portion of the CCAG SAP identifier is required and is used to define the CCA
.sap-sap — The .sap-sap portion of the CCAG SAP identifier is optional and is used to explicitly
:cc-id — The :cc-id portion of the CCAG SAP identifier is required and specifies the unique cc-id in
7750 SR OS Services Guide
CCAG type.
the SAP must be created. The specified ccag-id must exist on the system or the SAP creation will
fail. The leading dash must be included as a separator between ccag and the ccag-id.
Values -1 (dash 1) to -8 (dash 8)
Default
None
bandwidth path with will be associated with the SAP. The path association must be specified and
.a and .b are mutually exclusive. The .a designation identifies the SAP as being on the Alpha path
and the .b designation identifies the SAP as being on the Beta path. The paired SAP or network
IP interface using the same cc-id as the SAP must be associated with the opposite path. The
leading period must be included as a separator between the ccag-id and the path designator.
Values .a or .b
Default None
define the pairing type as SAP-2-SAP. The .sap-sap pairing type is only used when the cross
connect object sharing the same cc-id on the opposite path is a CCAG SAP. A cross connection
between an IES CCAG SAP and a network IP interface is not currently allowed. If .sap-sap is not
specified, .sap-sap is assumed and does not need to be included in the SAP identification. When
specified, the leading period must be used as a separator between the path designator and the
pairing type.
Default
.sap-sap
use by the CCAG SAP and the cross connect object on the other path.
Values 1 to 4094
Default
None
Versatile Service Module
Page 1489