Alcatel-Lucent 7750 SR Manual page 1315

scheduler-policy-name: — The scheduler-policy-name parameter applies an existing scheduler policy
ipsec-gw
Syntax ipsec-gw name
no ipsec-gw
Context config>service>vprn>interface>sap
Description This command configures the IPSec gateway.
Parameters
name — Specifies the IPSec gateway name up to 32 characters in length.
default-secure-service
Syntax default-secure-service service-id ipsec-interface ip-int-name
no default-secure-service
Context config>service>vprn>interface>sap>ipsec-gw
Description This command specifies a service ID or service name of the default security service used by this SAP
IPSec gateway.
Parameters
service-id — Specifies a default secure service.
default-tunnel-template
Syntax default-tunnel-template ipsec template identifier
no default-tunnel-template
Context config>service>vprn>interface>sap>ipsec-gw
Description This command configures the default tunnel policy template for the gateway.
Parameters
ipsec template id* — [1..2048]
7750 SR OS Services Guide
that was created in the config>qos>scheduler-policy scheduler-policy-name context to create
the hierarchy of ingress or egress virtual schedulers. The scheduler names defined within the
policy are created and made available to any ingress or egress queues created on associated
SAPs.
Values
Any existing valid scheduler policy name.
Values
service-id: 1 — 2147483648
Virtual Private Routed Network Services
Page 1315