Alcatel-Lucent 7750 SR Manual page 1189

VPRN instance remains up). BGP peering will remain up but the exceeding BGP routes will not be
added to the VRF.
The maximum route threshold can dynamically change to increase the number of supported routes
even when the maximum has already been reached. Protocols will resubmit their routes which were
initially rejected.
The no form of the command disables any limit on the number of routes within a VRF context. Issue
the no form of the command only when the VPRN instance is shutdown.
Default
0 or disabled — The threshold will not be raised.
Parameters number — An integer that specifies the maximum number of routes to be held in a VRF context.
log-only — This parameter specifies that if the maximum limit is reached, only log the event. log-
threshold percentage — The percentage at which a warning log message and SNMP trap should be
multicast-info-policy
Syntax multicast-info-policy policy-name
no multicast-info-policy
Context config>service>vprn
Description
This command configures multicast information policy.
Parameters policy-name — Specifies the policy n ame.
mc-maximum-routes
Syntax mc-maximum-routes number [log-only] [threshold threshold]
Context config>service>vprn
Description This command specifies the maximum number of multicast routes that can be held within a VPN
routing/forwarding (VRF) context. When this limit is reached, a log and SNMP trap are sent. If the
log-only parameter is not specified and the maximum-routes value is set below the existing number
of routes in a VRF, then no new joins will be processed.
The no form of the command disables the limit of multicast routes within a VRF context. Issue the no
form of the command only when the VPRN instance is shutdown.
Default no mc-maximum-routes
7750 SR OS Services Guide
Values 1 — 2147483647
only does not disable the learning of new routes.
set. There are two warnings, the first is a mid-level warning at the threshold value set and the
second is a high-level warning at level between the maximum number of routes and the mid-level
rate ( [mid+max] / 2 ).
Values
0 — 100
Values
32 chars max
Virtual Private Routed Network Services
Page 1189