Alcatel-Lucent 7750 SR Manual page 1205

Enter the no form of the command to maintain a persistent tunnel.
The no form of the command removes the idle timeout from the configuration.
Default
no idle-timeout
Parameters
idle-timeout — Specifies the idle timeout value, in seconds until the group is removed.
lns-group
Syntax lns-group lns-group-id
no lns-group
Context config>service>vprn>l2tp>group
Description
This command configures the ISA LNS group.
Parameters lns-group-id — Specifies the LNS group ID.
local-address
Syntax local-address ip-address
no local-address
Context config>service>vprn>l2tp>group>tunnel
Description
This command configures the local address.
Parameters
ip-address — Specifies the IP address used during L2TP authentication.
local-name
Syntax local-name host-name
no local-name
Context config>service>vprn>l2tp>group
config>service>vprn>l2tp>group>tunnel
Description
This command creates the local host name used by this system for the tunnels in this L2TP group
during the authentication phase of tunnel establishment. It can be used to distinguish tunnels.
The no form of the command removes thename from the configuration.
Default local-name
7750 SR OS Services Guide
Default no idle-timeout
Values 0 — 3600
Values
1..4
Virtual Private Routed Network Services
Page 1205