Alcatel-Lucent 7750 SR Manual page 1419

The no form of the command resets all timers to their default values of 30, 180, and 120 seconds
respectively.
Default
no timers
Parameters update — The RIP update timer value in seconds.
timeout — The RIP timeout timer value in seconds.
flush — The RIP flush timer value in seconds.
group
Syntax [no] group group-name
Context config>service>vprn>rip
Description
This command creates a context for configuring a RIP group of neighbors. RIP groups are a way of
logically associating RIP neighbor interfaces to facilitate a common configuration for RIP interfaces.
The no form of the command deletes the RIP neighbor interface group. Deleting the group will also
remove the RIP configuration of all the neighbor interfaces currently assigned to this group.
Default
no group — No group of RIP neighbor interfaces defined
Parameters
group-name — The RIP group name. Allowed values are any string up to 32 characters long
7750 SR OS Services Guide
• Timeout timer — If a router is not updated by the time the timer expires, the route is declared
invalid, but maintained in the RIP database.
• Flush timer — Determines how long a route is maintained in the RIP database, after it has been
declared invalid. Once this timer expires it is flushed from the RIP database completely.
Values
1 — 600
Default
30
Values 1 — 1200
Default
180
Values
1 — 1200
Default 120
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
Virtual Private Routed Network Services
Page 1419