Provision Ccag Parameters - Alcatel-Lucent 7750 SR Manual

Provision CCAG Parameters

Once a CCA is provisioned into the system, it must be placed in a Cross Connect Aggregation
Group (CCAG) to be used by cross connect objects. Besides CCA membership, the CCAG also
supports bandwidth control parameters (see
manipulate forwarding distribution between objects in the alpha and beta path groups and the
aggregate rate allowed on the CCA.
Use the following CLI syntax to provision CCAG components.
CLI Syntax: config>vsm#
The following example displays the command usage to provision CCAG components:
Example
The following example displays the configuration:
A:ALA-48>config>vsm# info
----------------------------------------------
...
----------------------------------------------
A:ALA-48>config>vsm#
7750 SR OS Services Guide
ccag ccag-id [create]
cca-rate kilobits-per-second
description description-string
member-cca card-slot/mda-number
path {a|b}
no shutdown
:
config>vsm# ccag 1
config>vsm>ccag# description "VSM test"
config>vsm>ccag# cca-rate 1000000
config>vsm>ccag# member-cca 10/1
ccag 1 create
description "VSM test"
cca-rate 1000000
member-cca 10/1
exit
Versatile Service Module
Configure Path Components on page 1446) used to
Page 1445