Alcatel-Lucent 7750 SR Manual page 1034

ETH-CFM Service Commands
ingress
Syntax ingress
Context config>service>ies>if>sap>atm
Description This command configures ingress ATM attributes for the SAP.
traffic-desc
Syntax traffic-desc traffic-desc-profile-id
no traffic-desc
Context config>service>ies>if>sap>atm>egress
config>service>ies>if>sap>atm>ingress
Description This command assigns an ATM traffic descriptor profile to a given context (for example, a SAP).
When configured under the ingress context, the specified traffic descriptor profile defines the traffic
contract in the forward direction.
When configured under the egress context, the specified traffic descriptor profile defines the traffic
contract in the backward direction.
The no form of the command reverts the traffic descriptor to the default traffic descriptor profile.
Default
The default traffic descriptor (trafficDescProfileId. = 1) is associated with newly created PVCC-
delimited SAPs.
Parameters traffic-desc-profile-id — Specify a defined traffic descriptor profile (see the QoS atm-td-profile
oam
Syntax oam
Context config>service>ies>if >sap>atm
Description
This command enables the context to configure OAM functionality for a PVCC delimiting a SAP.
The ATM-capable MDAs support F5 end-to-end OAM functionality (AIS, RDI, Loopback):
Page 1034
aal5snap-bridged — Bridged encapsulation for LLC encapsulated circuit (LLC/
SNAP precedes protocol datagram) as defined in RFC 2684.
aal5mux-bridged-eth-nofcs — Bridged IP encapsulation for VC multiplexed
circuit as defined in RFC 2684.
command).
• ITU-T Recommendation I.610 - B-ISDN Operation and Maintenance Principles and Functions
version 11/95
• GR-1248-CORE - Generic Requirements for Operations of ATM Network Elements (NEs). Issue
3 June 1996
7750 SR OS Services Guide