Alcatel-Lucent 7750 SR Manual page 1415

export-limit
Syntax export-limit number [log percentage]
no export-limit
Context config>service>vprn>rip
Description This command configures the maximum number of routes (prefixes) that can be exported into RIP
from the route table.
The no form of the command removes the parameters from the configuration.
Default
no export-limit, the export limit for routes or prefixes is disabled..
Parameters
number — Specifies the maximum number of routes (prefixes) that can be exported into RIP from the
log percentage — Specifies the percentage of the export-limit, at which a warning log message and
import
Syntax import policy [policy...]
no import
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description
This command specifies the import policies to be used to control routes advertised from RIP
neighbors. By default, RIP accepts all routes from configured RIP neighbors. Import policies can be
used to limit or modify the routes accepted and their corresponding parameters and metrics.
The no form of the command removes all route policy names from the import list.
Default no import
Parameters
policy — A route policy statement name.
message-size
Syntax message-size max-num-of-routes
no message-size
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description
This command sets the maximum number of routes per RIP update message.
7750 SR OS Services Guide
route table.
Values
1 — 4294967295
SNMP notification would be sent.
Values
1 — 100
Virtual Private Routed Network Services
Page 1415