Alcatel-Lucent 7750 SR Manual page 1386

VPRN Service Configuration Commands
When the number of routes reaches 90% of this limit, an SNMP trap is sent. When the limit is
exceeded, the BGP peering is dropped and disabled.
The no form of the command removes the prefix-limit.
Default
no prefix-limit
Parameters
limit — The number of routes that can be learned from a peer, expressed as a decimal integer.
rapid-update
Syntax rapid-update {[l2-vpn] [mvpn-ipv4]}
no rapid-update {[l2-vpn] [mvpn-ipv4]}
Context config>service>vprn>bgp
Description This command enables and disables BGP rapid update for specified address-families. When no
parameter is given for the no rapid-update statement, rapid update is disabled for all address-families.
Default
no rapid-update
rapid-withdrawal
Syntax [no] rapid-withdrawal
Context config>service>vprn>bgp
Description This command disables the delay (Minimum Route Advertisement) on sending BGP withdrawals.
Normal route withdrawals may be delayed up to the mininum route advertisement to allow for
efficient packing of BGP updates.
The no form of the command removes this command from the configuration and returns withdrawal
processing to the normal behavior.
Default no rapid-withdrawal
remove-private
Syntax [no] remove-private
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description
This command allows private AS numbers to be removed from the AS path before advertising them
to BGP peers.
Page 1386
Values
1 — 4294967295
7750 SR OS Services Guide