Alcatel-Lucent 7750 SR Manual page 1420

VPRN Service Configuration Commands
neighbor
Syntax [no] neighbor ip-int-name
Context config>service>vprn>rip>group
Description This command creates a context for configuring a RIP neighbor interface.
By default, interfaces are not activated in any interior gateway protocol such as RIP unless explicitly
configured.
The no form of the command deletes the RIP interface configuration for this interface. The shutdown
command in the config>router>rip>group group-name>neighbor ip-int-name context can be used
to disable an interface without removing the configuration for the interface.
Default
no neighbor — No RIP interfaces defined
Parameters ip-int-name — The IP interface name. Interface names must be unique within the group of defined IP
Page 1420
interfaces for config router interface and config service vprn interface commands. An
interface name cannot be in the form of an IP address. Interface names can be any string up to 32
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
If the IP interface name does not exist or does not have an IP address configured an error
message will be returned.
7750 SR OS Services Guide