Alcatel-Lucent 7750 SR Manual page 1422

Os services guide
Hide thumbs Also See for 7750 SR:
Table of Contents

Advertisement

VPRN Service Configuration Commands
local-ip
Syntax
local-ip {ip-prefix/prefix-length | ip-prefix netmask | any}
Context
config>service>vprn>ipsec>sec-plcy>entry
Description
This command configures the local (from the VPN ) IP prefix/mask for the policy parameter entry.
Only one entry is necessary to describe a potential flow. The local-ip and remote-ip commands can
be defined only once. The system will evaluate the local IP as the source IP when traffic is examined
in the direction of VPN to the tunnel and as the destination IP when traffic flows from the tunnel to
the VPN. The remote IP will be evaluated as the source IP when traffic flows from the tunnel to the
VPN when traffic flows from the VPN to the tunnel.
Parameters
ip-prefix — The destination address of the aggregate route in dotted decimal notation.
netmask — The subnet mask in dotted decimal notation.
any — keyword to specify that it can be any address.
remote-ip
Syntax
remote-ip ip-prefix/prefix-length | ip-prefix netmask | any}
Context
config>service>vprn>ipsec>sec-plcy>entry
Description
This command configures the remote (from the tunnel) IP prefix/mask for the policy parameter entry.
Only one entry is necessary to describe a potential flow. The local-ip and remote-ip commands can
be defined only once. The system will evaluate the local IP as the source IP when traffic is examined
in the direction of VPN to the tunnel and as the destination IP when traffic flows from the tunnel to
the VPN. The remote IP will be evaluated as the source IP when traffic flows from the tunnel to the
VPN when traffic flows from the VPN to the tunnel.
Parameters
ip-prefix — The destination address of the aggregate route in dotted decimal notation.
netmask — The subnet mask in dotted decimal notation.
any — keyword to specify that it can be any address.
ipsec-interface
Syntax
ipsec-interface ip-int-name [create]
no ipsec-interface ip-int-name
Context
config>service>vprn
Description
This command configures an IPSec interface.
Page 1422
Values
a.b.c.d (host bits must be 0)
prefix-length
Values
a.b.c.d (host bits must be 0)
prefix-length
1 — 32
1 — 32
7750 SR OS Services Guide

Advertisement

Table of Contents
loading

Table of Contents