Alcatel-Lucent 7750 SR Manual page 1479

ingress
Syntax ingress
Context config>vsm>ccag ccag-id>path {a | b}>sap-sap
config>vsm>ccag ccag-id>path {a | b}>sap-net
Description
This command changes the current CLI context to the path's context. This context contains the
ingress buffer pool configuration commands.
The CCA path's ingress nodal context always exists and cannot be removed.
sap-net
Syntax sap-net
Context config>vsm>ccag ccag-id>path {a | b}
Description
This command changes the current CLI context to the path sap-net nodal context. This context
contains the ingress and egress buffer pool configuration commands. The sap-net>path context is
associated with all SAPs defined on the CCAG path (alpha or beta depending on the path context)
that cross connect to a network IP interface on the other path.
The CCA path sap-net nodal context always exists and cannot be removed.
slope-policy
Syntax slope-policy slope-policy-name
no slope-policy
Context config>vsm>ccag ccag-id>path {a | b}>sap-net>ingress>pool
Description
This command defines the slope policy used to mange the shared portion of the buffer pools WRED
slopes. The commands in the policy control the administrative state of the slopes, the start and knee
points of each slope and the time-average-factor for the weighted average buffer utilization
calculation.
The no form of the command configures the default slope policy as the managing policy for the buffer
pool.
Parameters
slope-policy-name — The slope-policy-name parameter defines the name of the WRED slope policy
7750 SR OS Services Guide
used to manage the WRED slopes in the shared portion of the buffer pool.
Values
Any existing slope policy name.
Versatile Service Module
Page 1479