Alcatel-Lucent 7750 SR Manual page 1191

service-name
Syntax service-name service-name
no service-name
Context config>service>vprn
Description This command configures an optional service name, up to 64 characters in length, which adds a name
identifier to a given service to then use that service name in configuration references as well as
display and use service names in show commands throughout the system. This helps the service
provider/administrator to identify and manage services within the 7750 SR, 7450 ESS and 7710 SR
platforms.
All services are required to assign a service ID to initially create a service. However, either the service
ID or the service name can be used o identify and reference a given service once it is initially created.
Parameters
service-name — Specifies a unique service name to identify the service. Service names may not begin
sgt-qos
Syntax sgt-qos
Context config>service>vprn
Description This command enables the context to configure DSCP/Dot1p re-marking for self-generated traffic.
application
Syntax application dscp-app-name dscp {dscp-value | dscp-name}
application dot1p-app-name dot1p dot1p-priority
no application {dscp-app-name | dot1p-app-name}
Context config>service>vprn>sgt-qos
Description
This command configures DSCP/Dot1p re-marking for self-generated traffic. When an application is
configured using this command, then the specified DSCP name/value is used for all packets generated
by this application within the router instance it is configured.
Using the value configured in this command:
7750 SR OS Services Guide
with an integer (0-9).
• Sets the DSCP bits in the IP packet.
• Maps to the FC. This value will be signaled from the CPM to the egress forwarding complex.
• Based on this signaled FC the egress forwarding complex QoS policy sets the IEEE802.1 dot1P
and LSP EXP bits.
• The Dot1P and the LSP EXP bits are set by the egress complex for all packets based on the sig-
naled FC. This includes ARP and IS-IS packets that, due to their nature, do not carry DSCP bits.
• The DSCP value in the egress IP header will be as configured in this command. The egress QoS
policy will not overwrite this value.
Virtual Private Routed Network Services
Page 1191