Alcatel-Lucent 7750 SR Manual page 1216

VPRN Service Configuration Commands
startup-wait-time
Syntax [no] startup-wait-time [min minutes] [sec seconds]
Context config>service>vprn>dhcp>server>failover
Description This command specifies the startup wait time. The startup wait time is the time that one server
attempts to contact the partner server. During this time, the server is unresponsive to DHCP client
requests.
Parameters
min minutes — Specifies the minute parameter of the startup wait time feature.
sec seconds — Specifies the seconds parameter of the startup wait time feature.
disable-force-renews
Syntax [no] disable-force-renews
Context config>service>vprn>dhcp>server
Description
This command enables the sending of sending forcerenew messages.
The no form of the command disables the sending of forcerenew messages.
Default
no disable-force-renews
pool
Syntax pool pool-name [create]
no pool pool-name
Context config>service>vprn>dhcp>server
Description This command configures a DHCP address pool on the router.
Default
none
Parameters pool name — Specifies the name of this IP address pool. Allowed values are any string up to 32
create — Keyword used to create the entity. The create keyword requirement can be enabled/
Page 1216
Values
1 — 59
Values
1 — 59
characters long composed of printable, 7-bit ASCII characters.
disabled in the environment>create context.
7750 SR OS Services Guide