Alcatel-Lucent 7750 SR Manual page 1179

interface
Syntax interface ip-int-name
no interface
Context config>service>vprn>igmp
Description This command enables the context to configure IGMP interface parameters.
Parameters
ip-int-name — Specifies the name of the IP interface. Interface names can be from 1 to 32
import
Syntax import policy-name
no import
Context config>service>vprn>igmp>interface
Description This command imports a policy to filter IGMP packets. The no form of the command removes the
policy association from the IGMP instance.
Default
no import — No import policy specified.
Parameters
policy-name — The import route policy name. Allowed values are any string up to 32 characters long
max-groups
Syntax max-groups value
no max-groups
Context config>service>vprn>igmp>interface
Description
This command specifies the maximum number of groups for which IGMP can have local receiver
information based on received IGMP reports on this interface. When this configuration is changed
dynamically to a value lower than the currently accepted number of groups, the groups that are
already accepted are not deleted. Only new groups will not be allowed.
Default
0, no limit to the number of groups.
Parameters
value — Specifies the maximum number of groups for this interface.
7750 SR OS Services Guide
alphanumeric characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
Values
1 — 32 characters maximum
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
The specified name(s) must already be defined.
Values
1 — 16000
Virtual Private Routed Network Services
Page 1179