Configuring Vprn Components; Creating A Vprn Service - Alcatel-Lucent 7750 SR Manual

Configuring VPRN Components

This section provides VPRN configuration examples for the following entities:
•
•
•
•
•
•
•
•
VPRN parameters

Creating a VPRN Service

Use the following CLI syntax to create a VRPN service. A route distinguisher must be defined in
order for VPRN to be operationally active.
CLI Syntax: config>service# vprn service-id [customer customer-id]
The following example displays a VPRN service configuration.
*A:ALA-1>config>service# info
----------------------------------------------
...
...
----------------------------------------------
*A:ALA-1>config>service>vprn#
7750 SR OS Services Guide
Creating a VPRN Service on page 1103
Configuring Global VPRN Parameters on page 1104
Configuring VPRN Protocols - PIM on page 1106
Configuring Router Interfaces on page 1107
Configuring VPRN Protocols - OSPF on page 1113
Configuring a VPRN Interface SAP on page 1115
Configuring VPRN Protocols - BGP on page 1108
Configuring VPRN Protocols - RIP on page 1111
route-distinguisher [ip-address:number1 | asn:number2]
description description-string
no shutdown
vprn 1 customer 1 create
route-distinguisher 10001:0
no shutdown
exit
Virtual Private Routed Network Services
Page 1103