VPRN Service Configuration Commands
default-group-interface
Syntax
default-group-interface ip-int-name service-id service-id
no default-group-interface
Context
config>service>vprn>l2tp>group>ppp
Description
This command configures the default group interface.
Parameters
ip-int-name — Specifies the interface name.
service-id — Specifies the service ID.
svc-name — Specifies the service name (instead of service ID).
keepalive
Syntax
keepalive seconds [hold-up-multiplier multiplier]
no keepalive
Context
config>service>vprn>l2tp>group>ppp
Description
This command configures the PPP keepalive interval and multiplier.
Parameters
seconds — Specifies in seconds the interval.
multiplier — Specifies the multiplier.
mtu
Syntax
mtu mtu-bytes
no mtu
Context
config>service>vprn>l2tp>group>ppp
Description
This command configures the maximum PPP MTU size.
Parameters
mtu-bytes — Specifies, in bytes, the maximum PPP MTU size.
Page 1208
Values
32 chars max
Values
1..2147483648
Values
64 chars max
Values
10..300
Values
1..5
Values
512..9212
7750 SR OS Services Guide