Common Configuration Tasks; Configure Vsm Ccag Components; Provision Vsm On An Mda - Alcatel-Lucent 7750 SR Manual

Common Configuration Tasks

This section provides a brief overview of the tasks that should be performed to configure VSM on
an MDA, router, router interface, and services.
•
•
•
•
•
•

Configure VSM CCAG Components

Use the CLI syntax displayed below to configure the following entities:
•
•
•
•
•

Provision VSM on an MDA

Before a CCA module may be utilized in the system, the CCA must be provisioned into an MDA
slot. The MDA provisioning command must be modified to support provisioning a CCA adaptor
type. Up to 8 member CCAs can be configured per CCAG.
CLI Syntax: config>card# mda mda-number mda-type {other-MDA-type|cca}
The following example displays the command usage to provision CCA on an MDA:
Example
config>card# mda 1
config>card>mda# mda-type vsm-cca
config>card>mda# exit
config>card#
7750 SR OS Services Guide
Provision one or more CCA as MDAs in the system.
Create VSM CCAGs on the system.
Provision CCAG path bandwidth, path weighting, and overall bandwidth parameters.
Provision member CCAs into a CCAG.
Provision service SAPs using a CCAG, path, and CCID for cross connect purposes.
Bind routed network IP interfaces to a CCAG, path, and CCID for cross connect purposes.
Provision VSM on an MDA on page 1443
Cross Connecting Network IP Interfaces on page 1448
Provision CCAG Parameters on page 1445
Configure Path Components on page 1446
Cross Connecting Services on page 1449
:
config# card 10
Versatile Service Module
Page 1443