Alcatel-Lucent 7750 SR Manual page 1372

VPRN Service Configuration Commands
disable-communities
Syntax disable-communities [standard] [extended]
no disable-communities
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description
This command configures BGP to disable sending communities.
Parameters
standard — Specifies standard communities that existed before VPRNs or 2547.
extended — Specifies BGP communities used were expanded after the concept of 2547 was
disable-fast-external-failover
Syntax [no] disable-fast-external-failover
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description
This command configures BGP fast external failover.
eibgp-loadbalance
Syntax [no] eibgp-loadbalance
Context config>service>vprn>bgp
Description This command enables eiBGP load sharing so routes with both MP-BGP and IPv4 next-hops can be
used simultaneously.
In order for this command to be effective, the ecmp and multipath commands for the associated
VPRN instance must also be configured to allow for multiple routes to the same destination.
The no form of the command used at the global level reverts to default values.
Default
no eibgp-loadbalance — Multipath disabled.
Page 1372
introduced, to include handling the VRF target.
7750 SR OS Services Guide