Alcatel-Lucent 7750 SR Manual page 1423

Os services guide

Hide thumbs Also See for 7750 SR:

Table of Contents

ip-int-name — Specifies the name of the IP interface. Interface names can be from 1 to 32

create — Keyword used to create the IPSec interface instance. The create keyword requirement can

[no] address {ip-address/mask | ip-address netmasks}

config>service>vprn>ipsec-if

This command assigns an IP address/IP subnet to the interface

ip-address — Specifies the base IP address of the subnet. This address must be unique within the

mask — The subnet mask in dotted decimal notation. Allowed values are dotted decimal addresses in

netmask — Specifies a string of 0s and 1s that mask or screen out the network part of an IP address so

ip-mtu octets

config>service>vprn>ipsec-if

This command configures the IP maximum transmit unit (packet) for this interface.

The no form of the command returns the default value.

octets — Specifies the MTU size for this interface.

7750 SR OS Services Guide

alphanumeric characters. If the string contains special characters (#, $, spaces, etc.), the entire

string must be enclosed within double quotes.

1 — 32 characters maximum

be enabled/disabled in the environment>create context.

subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range

1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

the range 128.0.0.0 – 255.255.255.252. Note that a mask of 255.255.255.255 is reserved for

system IP addresses.

that only the host computer part of the address remains.

Virtual Private Routed Network Services