Alcatel-Lucent 7750 SR Manual page 1486

Os services guide

Hide thumbs Also See for 7750 SR:

Table of Contents

Services Commands

.sap-net — The .sap-net portion of the CCAG SAP identifier specifies that the SAP is of the SAP-2-

.sap-sap — The .sap-sap portion of the CCAG SAP identifier is mutually exclusive to .sap-sap and is

:cc-id — The :cc-id portion of the CCAG SAP identifier is required and specifies the unique cc-id in

create — Explicitly indicates that the specified CCAG SAP is being created by the sap command.

IP interface using the same cc-id as the SAP must be associated with the opposite path. The

leading period must be included as a separator between the ccag-id and the path designator.

Net pairing type and is required when the cc-id is paired with a network IP interface. The pairing

type .sap-net is mutually exclusive with pairing type .sap-sap. If .sap-net is not specified, .sap-

sap is assumed and does not need to be included in the SAP identification. When specified, the

leading period must be used as a separator between the path designator and the pairing type.

.sap-net or .sap-sap

used to define the pairing type as SAP-2-SAP. The .sap-sap pairing type is only used when the

cross connect object sharing the same cc-id on the opposite path is a CCAG SAP. If the other

cross connect object is a network IP interface, the pairing type must be defined as .sap-net. If

.sap-net is not specified, .sap-sap is assumed and does not need to be included in the SAP

identification. When specified, the leading period must be used as a separator between the path

designator and the pairing type.

.sap-net or .sap-sap

use by the CCAG SAP and the cross connect object on the other path.

Handling the inclusion or exclusion state of the create keyword is dependent on the system

environment variable create.

When the system environment variable create is enabled, the system requires the explicit use of

the create keyword when creating objects such as SAPs. If the keyword is not included and the

specified CCAG SAP has not already been created, an error will occur and the CLI will not

change context to the specified CCAG SAP instance. This is designed to prevent the inadvertent

creation of a CCAG SAP in the event where the wrong CCAG SAP identifier is specified during

an attempt to edit an existing CCAG SAP. If the create keyword is specified, the CCAG SAP

will be created if it does not already exist or if it does exist, the CLI context will change to the

specified CCAG SAP.

When the system environment variable create is disabled (using the no create command), the

system will not require the create keyword when creating a CCAG SAP. In the event that the sap

command is issued with a CCAG SAP identifier that previously had not been created, that

CCAG SAP will be created.

Once a CCAG SAP has been created, the create keyword is ignored when a sap command is

executed with that CCAG SAP identifier and the CLI context will change to the specified CCAG

7750 SR OS Services Guide