Alcatel-Lucent 7750 SR Manual page 1195

application
Syntax application app [ip-int-name|ip-address]
no application app
Context config>service>vprn>source-address
Description This command specifies the source address and application.
Parameters
app — Specify the application name.
ip-int-name | ip-address — Specifies the name of the IP interface or IP address. If the string contains
application
Syntax application app ipv6-address
Context config>service>vprn>source-address
Description
This command specifies the IPv6 source address and application.
Parameters app — Specify the application name.
ipv6-address — Specifies the name of the IPv6 address. If the string contains special characters (#, $,
static-route
Syntax [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference]
[metric metric] [tag tag] [enable | disable] {next-hop ip-int-name | ip-address | ipsec-
tunnel ipsec-tunnel-name} [bfd-enable | {cpe-check cpe-ip-address [interval seconds]
[drop-count count] [log]}]
[no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference]
[metric metric] [tag tag] [enable | disable] indirect ip-address [cpe-check cpe-ip-address
[interval seconds][drop-count count] [log]]
[no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference]
[metric metric] [tag tag] [enable | disable] black-hole
Context config>service>vprn
Description
This command creates static route entries within the associated router instance. When configuring a
static route, either next-hop, indirect or black-hole must be configured.
The no form of the command deletes the static route entry. If a static route needs to be removed when
multiple static routes exist to the same destination, then as many parameters to uniquely identify the
static route must be entered.
7750 SR OS Services Guide
Values telnet, ssh, traceroute, ping
special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Values
telnet, ssh, traceroute, ping
spaces, etc.), the entire string must be enclosed within double quotes.
Virtual Private Routed Network Services
Page 1195