Alcatel-Lucent 7750 SR Manual page 1476

VSM Path Commands
Parameters path-weight — The path-weight parameter is required and is used by the system to determine the
sap-sap
Syntax sap-sap
Context config cca>ccag ccag-id>path {a | b}
Description This command changes the current CLI context to the path SAP-SAP nodal context. This context
contains the ingress and egress buffer pool configuration commands. The sap-sap>path context is
associated with all SAPs defined on the CCAG path (alpha or beta depending on the path context)
that cross connect to a SAP on the other path.
The CCA path SAP-SAP nodal context always exists and cannot be removed.
mac
Syntax [no] mac mac-address
Context config>vsm>ccag ccag-id>path {a | b}
config>vsm>ccag ccag-id>path {a | b}>sap-net
config>vsm>ccag ccag-id>path {a | b}>net-sap
Description This command overrides the default MAC address for the path's context.
The no form of the command returns the in-use MAC address for the path's context to the default
MAC from the chassis MAC pool.
Parameters mac-address — Defines the IEEE MAC address that is to be associated with the path's context.
Page 1476
scheduling percentage for both paths. Changing the path-weight for one path affects both paths
scheduling percentage. The resulting scheduling percentage changes are applied to all CCAs in
the CCAG membership list.
Values 1 to 100
Default 50
Values Any valid IEEE MAC source MAC address
(6 byte address expressed in hexadecimal notation with each byte separated by a
dash (-)).
Default The path's default sap-sap MAC address is derived from the chassis MAC address
pool.
7750 SR OS Services Guide