Vll Clear Commands - Alcatel-Lucent 7750 SR Manual

VLL Clear Commands

id
Syntax id service-id
Context clear>service
clear>service>statistics
Description This command clears commands for a specific service.
Parameters service-id — The ID that uniquely identifies a service.
arp
Syntax arp
Context clear>service>id
Description
This command clears all ARP entries. This command is only valid for Ipipe services.
host-tracking
Syntax host-tracking [sap sap-id] [host ip-address]
Context clear>service>id
Description This command clears host tracking data.
mesh-sdp
Syntax mesh-sdp sdp-id[:vc-id] ingress-vc-label
Context clear>service>id
Description
This command clears and reset sthe mesh SDP binding.
Parameters sdp-id — The spoke SDP ID for which to clear statistics.
vc-id — The virtual circuit ID on the SDP ID to be reset.
ingress-vc-label — Specifies to clear the ingress VC label.
7750 SR OS Services Guide
Values service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
Values
1 — 17407
Values 1 — 4294967295
VLL Clear Commands
Page 1569