Alcatel-Lucent 7750 SR Manual page 703

Default rate max cir 0 — The max default specifies the amount of bandwidth in kilobits per second
Parameters
pir-rate — Defines the administrative PIR rate, in kilobits, for the queue. When the rate command is
cir cir-rate — The cir parameter overrides the default administrative CIR used by the queue. When
scheduler-override
Syntax [no] scheduler-override
Context config>service>vpls>sap>egress
config>service>vpls>sap>ingress
Description This command specifies the set of attributes whose values have been overridden via management on
this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the
value defined on the SAP's ingress scheduler policy.
scheduler
Syntax scheduler scheduler-name
no scheduler scheduler-name
Context config>service>vpls>sap>egress>sched-override
Description This command can be used to override specific attributes of the specified scheduler name. A
scheduler defines a bandwidth controls that limit each child (other schedulers and queues) associated
with the scheduler. Scheduler objects are created within the hierarchical tiers of the policy. It is
assumed that each scheduler created will have queues or other schedulers defined as child
associations. The scheduler can be a child (take bandwidth from a scheduler in a higher tier, except
for schedulers created in tier 1). A total of 32 schedulers can be created within a single scheduler
policy with no restriction on the distribution between the tiers.
7750 SR OS Services Guide
(thousand bits per second). The max value is mutually exclusive to the pir-rate value.
executed, a valid PIR setting must be explicitly defined. When the rate command has not been
executed, the default PIR of max is assumed.
Fractional values are not allowed and must be given as a positive integer.
The actual PIR rate is dependent on the queue's adaptation-rule parameters and the actual
hardware where the queue is provisioned.
Values
1 — 100000000
Default
max
the rate command is executed, a CIR setting is optional. When the rate command has not been
executed or the cir parameter is not explicitly specified, the default CIR (0) is assumed.
Fractional values are not allowed and must be given as a positive integer. The sum keyword
specifies that the CIR be used as the summed CIR values of the children schedulers or queues.
Values
0 — 100000000, max, sum
Default
0
Virtual Private LAN Services
Page 703