Alcatel-Lucent 7750 SR Manual page 1490

Services Commands
create — Explicitly indicates that the specified CCAG SAP is being created by the sap command.
sap
Syntax VPRN SAP sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id [create]
no sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id
Context config>service>vprn>interface
Description
This command creates a cross connect SAP on the ccag-id referenced in the VPRN service. A CCAG
SAP is identified by four items; the ccag-id, the CCAG path, the pairing type and the cc-id. A CCAG
SAP on a VPRN IP interface supports all the available QoS, filtering and accounting features as a
VPRN IP interface Dot1Q SAP.
The no form of the command removes a SAP from the VPRN service IP interface context. Once
removed, all information and resources concerning the SAP is deleted from the system including the
CCAG cc-id in use on the CCA path.
Parameters ccag — The ccag portion of the SAP identifier is required and specifies that the vprn SAP is of the
-ccag-id — Specifies which ccag-id on which the SAP must be created. The specified ccag-id must
.a | .b — The .a and .b portion of the CCAG SAP identifier is required and is used to define the CCA
Page 1490
Handling the inclusion or exclusion state of the create keyword is dependent on the system
environment variable create.
When the system environment variable create is enabled, the system requires the explicit use of
the create keyword when creating objects such as SAPs. If the keyword is not included and the
specified CCAG SAP has not already been created, an error will occur and the CLI will not
change context to the specified CCAG SAP instance. This is designed to prevent the inadvertent
creation of a CCAG SAP in the event where the wrong CCAG SAP identifier is specified during
an attempt to edit an existing CCAG SAP. If the create keyword is specified, the CCAG SAP
will be created if it does not already exist or if it does exist, the CLI context will change to the
specified CCAG SAP.
When the system environment variable create is disabled (using the no create command), the
system will not require the create keyword when creating a CCAG SAP. In the event that the sap
command is issued with a CCAG SAP identifier that previously had not been created, that
CCAG SAP will be created.
Once a CCAG SAP has been created, the create keyword is ignored when a sap command is
executed with that CCAG SAP identifier and the CLI context will change to the specified CCAG
SAP.
CCAG type.
exist on the system or the SAP creation will fail. The leading dash must be included as a
separator between ccag and the ccag-id.
Values -1 (dash 1) to -8 (dash 8)
Default
None
bandwidth path with will be associated with the SAP. The path association must be specified and
.a and .b are mutually exclusive. The .a designation identifies the SAP as being on the alpha path
and the .b designation identifies the SAP as being on the beta path. The paired SAP or network
7750 SR OS Services Guide