Cross Connecting Services - Alcatel-Lucent 7750 SR Manual

Cross Connecting Services

Services are provisioned onto a CCAG using a special CCAG SAP definition. CCAG SAPs must
reference a ccag-id, a CCA path (a or b), a pairing type (sap-sap or sap-net) and a unique cc-id.
The ccag-id identifies the group of CCAs that will be used for forwarding packets associated with
the SAP. The path identifies the bandwidth control grouping used to manage CCA egress
bandwidth. The pairing type helps the system identify which buffering resources will be used to
manage egress queuing of packets. Finally, the cc-id is used to explicitly cross connect the SAP to
another SAP or network IP interface configured with the same cc-id.
•
•
•
•
Epipe CLI Syntax: config>service#
The following displays an Epipe SAP configuration referencing a ccag-id:
A:ALA-48>config>service# info
-------------------------------------------
...
-------------------------------------------
A:ALA-48>config>service#
7750 SR OS Services Guide
Epipe on page 1449
VPLS on page 1450
IES on page 1451
VPRN on page 1452
epipe service-id [customer customer-id]
sap ccag-ccag-id.{a|b}[.sap-net|.sap-sap]:cc-id [create]
epipe 103 customer 6 vpn 103 create
sap 3/1/1.1.1 create
exit
sap ccag-1.a:100 create
exit
no shutdown
exit
Versatile Service Module
Page 1449