Configuring Ipsec Parameters - Alcatel-Lucent 7750 SR Manual

Configuring a VPRN Service with CLI

Configuring IPSec Parameters

The following output displays VPRN service with IPSec parameters configured.
*A:ALA-49>config# info
----------------------------------------------
...
100
exit
...
----------------------------------------------
*A:ALA-49>config#
Page 1116
vprn 200 customer 1 create
ipsec
security-policy 1 create
entry 1 create
local-ip 172.17.118.0/24
remote-ip 172.16.91.0/24
exit
exit
exit
route-distinguisher 1:1
ipsec-interface "ipsec-private" create
sap ipsec-1.private:1 create
tunnel "remote-office" create
security-policy 1
local-gateway-address 10.10.10.118 peer 10.10.7.91 delivery-service
dynamic-keying
exit
no shutdown
exit
exit
exit
interface "corporate-network" create
address 172.17.118.118/24
sap 1/1/2 create
exit
exit
static-route 172.16.91.0/24 ipsec-tunnel "remote-office"
no shutdown
exit
ike-policy 1
pre-shared-key "test"
transform 1
7750 SR OS Services Guide