Alcatel-Lucent 7750 SR Manual page 1487

Os services guide

Hide thumbs Also See for 7750 SR:

Table of Contents

sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id [create]

no sap ccag-ccag-id.{a | b}[.sap-net | .sap-sap]:cc-id

config>service>vpls

This command creates a cross connect SAP on the ccag-id referenced in the VPLS service. A CCAG

SAP is identified by four items; the ccag-id, the CCAG path, the pairing type and the cc-id. A VPLS

CCAG SAP supports all the available QoS, filtering and accounting features as a VPLS Dot1Q SAP.

The no form of the command removes a SAP from a service context. Once removed, all information

and resources concerning the SAP is deleted from the system including the CCAG cc-id in use on the

ccag — The ccag portion of the SAP identifier is required and specifies that the vpls SAP is of the

-ccag-id — Specifies which ccag-id on which the SAP must be created. The specified ccag-id must

.a | .b — The .a and .b portion of the CCAG SAP identifier is required and is used to define the CCA

.sap-net — The .sap-net portion of the CCAG SAP identifier specifies that the SAP is of the SAP-2-

.sap-sap — The .sap-sap portion of the CCAG SAP identifier is mutually exclusive to .sap-sap and is

7750 SR OS Services Guide

exist on the system or the SAP creation will fail. The leading dash must be included as a

separator between ccag and the ccag-id.

-1 (dash 1) to -8 (dash 8)

bandwidth path with will be associated with the SAP. The path association must be specified and

.a and .b are mutually exclusive. The .a designation identifies the SAP as being on the Alpha path

and the .b designation identifies the SAP as being on the Beta path. The paired SAP or network

IP interface using the same cc-id as the SAP must be associated with the opposite path. The

leading period must be included as a separator between the ccag-id and the path designator.

Net pairing type and is required when the cc-id is paired with a network IP interface. The pairing

type .sap-net is mutually exclusive with pairing type .sap-sap. If .sap-net is not specified, .sap-sap

is assumed and does not need to be included in the SAP identification. When specified, the

leading period must be used as a separator between the path designator and the pairing type.

.sap-net or .sap-sap

used to define the pairing type as SAP-2-SAP. The .sap-sap pairing type is only used when the

cross connect object sharing the same cc-id on the opposite path is a CCAG SAP. If the other

cross connect object is a network IP interface, the pairing type must be defined as .sap-net. If

.sap-net is not specified, .sap-sap is assumed and does not need to be included in the SAP

identification. When specified, the leading period must be used as a separator between the path

designator and the pairing type.

Versatile Service Module