VPRN Service Configuration Commands
init-delay
Syntax
init-delay seconds
no init-delay
Context
config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description
This command configures a VRRP initialization delay timer.
Default
no init-delay
Parameters
seconds — Specifies the initialization delay timer for VRRP, in seconds.
mac
Syntax
[no] mac ieee-mac-address
Context
config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description
This command assigns a specific MAC address to an IP interface.
The no form of this command returns the MAC address of the IP interface to the default value.
Default
The physical MAC address associated with the Ethernet interface that the SAP is configured on.
Parameters
ieee-mac-address — Specifies the 48-bit MAC address for the static ARP in the form
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
master-int-inherit
Syntax
[no] master-int-inherit
Context
config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description
This command allows the master instance to dictate the master down timer (non-owner context only).
Default
no master-int-inherit
Page 1346
Values
1 — 65535
7750 SR OS Services Guide