Alcatel-Lucent 7750 SR Manual page 1421

IPSec Configuration Commands
ipsec
Syntax ipsec
Context config>service>vprn>ipsec
Description This command enables the context to configure IPSec policies.
Default none
security-policy
security-policy security-policy-id [create]
no security-policy security-policy-id
Context config>service>vprn>ipsec
Description This command configures a security policy to use for an IPSec tunnel.
Default none
Parameters
security-policy-id — specifies a value to be assigned to a security policy.
create — Keyword used to create the security policy instance. The create keyword requirement can
entry
Syntax entry entry-id [create]
no entry entry-id
Context config>service>vprn>ipsec>sec-plcy
Description This command configures an IPSec security policy entry.
Parameters
entry-id — Specifies the IPSec security policy entry.
create — Keyword used to create the security policy entry instance. The create keyword requirement
7750 SR OS Services Guide
Values
1 — 8192
be enabled/disabled in the environment>create context.
Values 1 — 16
can be enabled/disabled in the environment>create context.
Virtual Private Routed Network Services
Page 1421