Alcatel-Lucent 7750 SR Manual page 1273

hours — Specifies the number of hours that the given IP address is valid.
minutes — Specifies the number of minutes that the given IP address is valid.
seconds — Specifies the number of seconds that the given IP address is valid.
server
Syntax server server1 [server2...(up to 8 max)]
Context config>service>vprn>if>dhcp
config>service>vprn>sub-if>grp-if>dhcp
Description
This command specifies a list of servers where requests will be forwarded. The list of servers can
entered as either IP addresses or fully qualified domain names. There must be at least one server
specified for DHCP relay to work. If there are multiple servers then the request is forwarded to all of
the servers in the list. There can be a maximum of 8 DHCP servers configured.
The flood command is applicable only in the VPLS case. There is a scenario with VPLS where the
VPLS node only wants to add Option 82 information to the DHCP request to provider per-subscriber
information, but it does not do full DHCP relay. In this case, the server is set to "flood". This means
the DHCP request is still a broadcast and is sent through the VPLS domain. A node running at L3
further upstream then can perform the full L3 DHCP relay function.
Default
no server
Parameters server — Specifies the DHCP server IP address.
relay-plain-bootp
Syntax [no] relay-plain-bootp
Context config>service>vprn>if>dhcp
Description
This command enables the relaying of plain BOOTP packets.
The no form of the command disables the relaying of plain BOOTP packets.
7750 SR OS Services Guide
Values 0 — 3650
Values
0 — 23
Values 0 — 59
Values
0 — 59
Virtual Private Routed Network Services
Page 1273