Alcatel-Lucent 7750 SR Manual page 1041

Os services guide
Hide thumbs Also See for 7750 SR:
Table of Contents

Advertisement

mac
Syntax
mac mac-address
no mac
Context
config>service>ies>if>vrrp
Description
This command assigns a specific MAC address to an IES IP interface.
The no form of the command returns the MAC address of the IP interface to the default value.
Default
The physical MAC address associated with the Ethernet interface that the SAP is configured on (the
default MAC address assigned to the interface, assigned by the system).
Parameters
mac-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
master-int-inherit
Syntax
[no] master-int-inherit
Context
config>service>ies>if>vrrp
Description
This command allows the master instance to dictate the master down timer (non-owner context only).
Default
no master-int-inherit
message-interval
Syntax
message-interval {[seconds] [milliseconds milliseconds]}
no message-interval
Context
config>service>ies>if>vrrp
Description
This command sets the advertisement timer and indirectly sets the master down timer on the virtual
router instance. The message-interval setting must be the same for all virtual routers participating as a
virtual router. Any VRRP advertisement message received with an Advertisement Interval field
different than the virtual router instance configured message-interval value will be silently discarded.
The message-interval command is available in both non-owner and owner vrrp virtual-router-id
nodal contexts. If the message-interval command is not executed, the default message interval of 1
second will be used.
The no form of this command restores the default message interval value of 1 second to the virtual
router instance.
Parameters
seconds — The number of seconds that will transpire before the advertisement timer expires.
7750 SR OS Services Guide
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
Values
1 — 255
Default
1
IES Service Configuration Commands
Page 1041

Advertisement

Table of Contents
loading

Table of Contents