Alcatel-Lucent 7750 SR Manual page 1308

VPRN Service Configuration Commands
Parameters ip ip-filter-id — Specifies IP filter policy. The filter ID must already exist within the created IP filters.
hsmda-queue-override
Syntax [no] hsmda-queue-override
Context config>service>vprn>if>sap>egress
config>service>vprn>if>sap>ingress
Description
This command enables the context to configure HSMDA queue overrides.
queue
Syntax queue queue-id [create]
no queue queue-id
Context config>service>vprn>if>sap>egress>hsmda-queue-overider
config>service>vprn>if>sap>ingress>hsmda-queue-overider
Description
This command configures overrides for a HSMDA queue. The actual valid values are those defined in
the given SAP QoS policy.
Parameters
queue-id — Specifies the queue ID to override.
create — This keyword is mandatory while creating a new queue override.
packet-byte-offset
Syntax packet-byte-offset {add add-bytes | subtract sub-bytes}
no packet-byte-offset
Context config>service>vprn>if>sap>egress>hsmda-queue-overider
config>service>vprn>if>sap>ingress>hsmda-queue-overider
Description This command adds or subtracts the specified number of bytes to the accounting function for each
packet handled by the HSMDA queue. Normally, the accounting and leaky bucket functions are based
on the Ethernet DLC header, payload and the 4 byte CRC (everything except the preamble and inter-
frame gap). As an example, the packet-byte-offset command can be used to add the frame
encapsulation overhead (20 bytes) to the queues accounting functions.
The accounting functions affected include:
Page 1308
Values
1 — 65535
Values
1 — 8
• Offered High Priority / In-Profile Octet Counter
• Offered Low Priority / Out-of-Profile Octet Counter
• Discarded High Priority / In-Profile Octet Counter
7750 SR OS Services Guide