Alcatel-Lucent 7750 SR Manual page 1363

priority
Syntax priority priority
no priority priority
Context config>router>pim>rp>local
config>service>vprn>pim>rp>rp-candidate
Description This command defines the priority used to become the rendezvous point (RP). The higher the priority
value, the more likely that this router will become the RP.
Use the no form of this command to revert to the default value.
Default
1
Parameters priority — Specify the priority to become the designated router. The higher the value the more likely
the router will become the RP.
static
Syntax static
Context config>service>vprn>pim>rp
Description
This command enables access to the context to configure a static rendezvous point (RP) of a PIM-SM
protocol instance.
Default none
address
Syntax [no] address ip-address
Context config>service>vprn>pim>rp>static
Description
This command configures the static rendezvous point (RP) address.
The no form of this command removes the static RP entry from the configuration.
Default
none
group-prefix
Syntax [no] group-prefix {grp-ip-address/mask | grp-ip-address netmask}
Context config>service>vprn>pim>rp>static
Context The group-prefix for a static-rp defines a range of multicast-ip-addresses for which a certain RP is
applicable.
7750 SR OS Services Guide
Values 0 — 255
Virtual Private Routed Network Services
Page 1363